AVX-10K Operation
Rev. 002
2022-08-25
22135254
VIAVI
Page
38
of
139
The instrument can save up to 32 WiFi network profiles.
Note: Your instrument will automatically save a profile after successfully connecting to a
new WiFi network.
1. Verify that network connectivity is enabled.
2. Go to the
System
menu, then press
Network
. The System Network menu appears.
3. Select the
WiFi
button at the bottom of the menu. Your instrument immediately
scans for WiFi networks and lists each network as an item.
4. Press Add Network. The Add WiFi Network menu appears.
5. Specify the following settings:
SSID –
The SSID (Service Set Identifier) of the WiFi network.
Password –
The password required to authenticate to the network. A password
is not required if Key Management is set to None.
Key Management –
Open, WEP, or WPA/WPA2 Personal.
Network Mode
– IPv4, IPv6, or IPv4/IPv6 Dual Stack. Depending on the Network
Mode, you have one or more additional settings to specify. For details, see those
areas earlier in this section.
6. Return to the System Network menu. The network that you created a profile for is
listed on the menu.
Note: Hidden SSIDs are not currently supported. To connect, un-hide the SSID, connect
the AVX-10K and re-hide the SSID or leave the SSID unhidden.
Содержание AVX-10K
