Vetland EX3000 Скачать руководство пользователя страница 38

Страница: 38 / 88

4-10

System Setup

Date/Time Setup

Note:

The date and time is already set at the factory before the system is shipped. If no changes are

made, the date and time will remain at the default setting.

1. Touch

Setup

. The Alarm and Setup menu displays (see Figure 4-7).

2. Scroll to

Set Date/Time

using the

buttons. It highlights in blue.

3. Touch

Setup

. The highlight shifts to the right-hand column.

4. Set the year by touching the

buttons until the correct

year

is displayed.

5. Touch the

button to shift to the month.

6. Set the

month

(01-12) by touching the

buttons until the correct month is displayed.

7. Continue to alternately touch the

and

buttons to shift to and set the

day

(1 to 31), the

hour

(01 to 24), and the

minute

(00 to 59).

8. Touch the

Setup

button again to shift the highlight back into the left-hand column and save the

settings.

9. To close the Alarm and Setup menu, touch the menu area of the screen or touch the

Setup

button

again.

Technician Password

The Technician Password line at the bottom of the Alarm and Setup Menu is for the use of authorized

Vetland

service technicians only.

Содержание EX3000

























































































Результаты поиска

Содержание EX3000

Отзывы:

Бренды по названию

Популярные бренды

Vetland EX3000, Руководство оператора

Результаты поиска

Содержание EX3000

Отзывы:

Бренды по названию

Популярные бренды