12
20304166
VCFDVI31 Gas Fireplace Insert
VeNtING INstAllAtION
AltItuDe CONsIDeRAtIONs
This heater has been tested at altitudes ranging from sea level to 4,500 feet (1,370 m). In this
testing, heater with standard orifice burns correctly with just an air shutter adjustment. If you need
to resize orifice for use at high altitude, contact your dealer.
High Temp
Silicone
FP2948
exhaust pipe
3" and 3" UL 1777 Gas
Liner
Apply high-temperature silicone to
lines on both ends and secure with
two (2) screws
Termination Kit
(Refer to Page 11)
Figure 10 -
Connecting Vent Pipe to Heater
FP2948
Failure to adjust air shutter properly may lead to improper com-
bustion which can create a safety hazard. Consult your dealer or
installer if you suspect an improperly adjusted air shutter.
W
ARNING