20304166
VCFDVI31 Gas Fireplace Insert
39
Make sure the master switch on the command center is in the “OFF” position. Wait at least five
(5) minutes before starting maintenance. Refer to Operating Instructions on Page 27.
VeNtING systeM
A qualified agency should examine the venting system annually.
CleANING GlAss
Clean the ceramic glass periodically. Condensation will sometimes form on the glass during a
cold startup. This is normal for all gas fireplaces and inserts. This condensation often attracts
dust and lint to the surface of the glass. The initial paint curing of the appliance can also leave
a slight film on the glass. This is a temporary problem.
You should clean the glass after the first two weeks of use. After that, you should clean the
glass no more than two or three times a season. Use a mild glass cleaner to clean the door.
Do not use abrasive cleaners. They will damage the glass surface.
pIlOt AND BuRNeR FlAMes
Visually check pilot and burner flames periodically.
Refer to Figure 56
for typical burner flame.
Refer to Figure 57
for typical pilot flame.
CleANING and MAINteNANCe
Figure 56 -
Typical Burner Flame
Figure 57 -
Typical Pilot Flame
FP2568
pilot flame
Sensor
Thermopile
FP2568
LG1131
VCFIDVI31 log flames
