Vermeer 504 PRO, Руководство оператора и по техническому обслуживанию

Страница: 90 / 153

504PRO_604PRO_o-m2_00
-
504/604 PRO Baler Preparing the Equipment Baler 7-27
7.8 Cutting Device
7.8.1 Insert a Net Roll
WARNING: Before you do work near the net knife, insert the net knife safeguard and secure the net knife.
CAUTION: Always wear safety gloves when doing work near the net knife and with the net.
CAUTION: Be aware that a net roll of 3000 m with a width of more than 1.23 m can be heavy (> 88 lb (40 kg)) and must be
installed with two persons.
Preparation
1. Open the side cover on the left.
2. Open the top cover (4) (see Figure 39 on page 7-15)
3. If the last wrapping process was not completely executed (for example because the net roll depleted during the wrapping process) do the
following:
1. Pull the handle (1) of the net knife carrier to the front and attach the safety chain (2) and secure it with the clip (3).
4. Push the bar (3) (see Figure 40 on page 7-16) backwards and secure it with the cotter pin.
5. Turn the crank handle (1) (see Figure 41 on page 7-17) until the tension spindle has turned inwards to the stop.
6. Remove the safety chain (2) from the net roll holder.
7.8.2 Insert the Knives
If you do not want to use all knives or a certain group of knives for a longer period it is better to replace the knives with blind knives (see page 11-
21). The blind knives make sure the slot of the not used knives stay free of crop material.
https://tractormanualz.com