Vermeer 504 PRO, Руководство оператора и по техническому обслуживанию

Страница: 17 / 153

504PRO_604PRO_o-m2_00
-
2-4 Safety Messages 504/604 PRO Baler
• Do not step onto the drawbar or other parts of the machine, when the machine is in operation. Keep sufficient distance to baler (pick-up,
running gear, bale unloading area).
• Before threading the net wrapping material: Follow Shutdown Procedure on page 6-1
•
All protection devices must be mounted to the baler and must be in correct state. Prior to opening the protection devices switch off driveline
and tractor engine and wait for all movement to stop.
•
Block the wheels of the baler to prevent unexpected movement when machine is parked.
•
When opening the tailgate keep a minimum distance of 10 ft (3 m) from electrical high-voltage lines.
• There is risk of when working around net knife or cutting device knives. Wear protective gloves.
• When working at the magnets of the knife holders: The function of cardiac pacemakers can be interrupted by magnetic fields.
When working at the magnets of the knife holders: Risk of injury by sharp edges – never hit the inserted knives from down with a striking tool.
Magnets could be damaged!
• Maintenance work may be carried out by trained persons only. All maintenance and repair works that is not part of the operating instructions
must be carried out by authorized personnel only.
• Prior to disassembling the complete pick-up the machine must be secured against backward tilt.
In case of locations on a slope: Never eject a bale where it can roll. A rolling bale can be destructive and result in death or serious injury. Never
try to stop a rolling bale. The area behind the baler should be clear before opening tailgate.
2.3 Machine Decals
2.3.1 Operational Signs
The most important operating instructions are labelled with operational signs. The exact meaning is described in the following. For a complete list
of all decals on the machine, please refer to the Spare Parts List.
https://tractormanualz.com