Verlinde STAGEMAKER 100618073 страница 96 Скачать руководство пользователя | Manualshive

Страница: 96 / 120

background image

7.4.7

Adjusting the slipping clutch

WARNING

MOVING MACHINERY HAZARD
When you adjust the slipping clutch, the motor must not run. Contact with the moving
parts of the motor could lead to serious injury, death, or damage to the product.
Always turn off the power to the chain hoist before starting to work with the clutch
adjustment tools.

WARNING

MOVING MACHINERY HAZARD
When you adjust the slipping clutch, make sure that you do not touch any of the
moving components. Touching the moving components during the adjustment of the
slipping clutch could cause serious injury or death.
Always turn off the power to the chain hoist before starting to adjust the slipping
clutch.

1. Attach a load of 125% of the rated capacity of the chain hoist to the hook.

NOTE

Certain regulations, such as the European EN standard, require only a load of 110%
of the rated capacity for the dynamic testing.

2. Try to lift the load with slow and fast speed.

▶

If the chain hoist cannot lift the load, remove the load. Turn off the power to the chain
hoist. Proceed to step 3.

▶

If the chain hoist is able to lift the load, proceed to phase 3 in step 5.

3. Remove the end cover on the brake side.

For more information, see chapter Removing and installing the hoist covers.

4. Adjust the slipping clutch.

To adjust the slipping clutch, turn the adjustment screw at the center of the brake. To
increase the torque, turn the adjustment screw clockwise. To decrease the torque, turn the
adjustment screw counter-clockwise.

NOTE

Make sure that you do not over-tighten the adjustment screw. Over-tightening the
adjustment screw can damage the springs of the slipping clutch.

7 MAINTENANCE

This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.

6/2020

«
...
94
95
96
97
98
...
»

Содержание STAGEMAKER 100618073

























































































































Отзывы:

Нет отзывов

Похожие инструкции для STAGEMAKER 100618073

Бренд: CM Страницы: 34

Бренд: Yale Страницы: 28

Бренд: Raptor Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды