Verlinde STAGEMAKER 100618073 страница 41 Скачать руководство пользователя | Manualshive

Страница: 41 / 120

background image

4. To install the end covers, put the end cover back on its place on the hoist frame. Tighten the

fours screws to the correct tightening torque.
For more information, see chapter Tightening torques for the chain hoist.

4.6

Installation steps

1.

Unpack the product. Dispose of the packing material in an environmentally compatible
way. For more information, see chapter Handling waste material.

2.

Check that the delivery is complete. For more information, see chapter Transport, packing,
scope of delivery.

3.

Connect the hoist to the power supply. For more information, see chapter Connecting the
hoist to power supply.

4.

If needed, adjust the lower hook position. For more information, see chapter Adjusting the
lower hook position.

5.

Before starting to use the product for the first time, follow the instructions that are given in
chapter Commissioning. Perform the commissioning checks and test. Before operating the
product, perform also the checks that are mentioned in chapter Checks before operating.

4.7

Suspending the chain hoist

WARNING

OVERLOAD HAZARD
Overloaded components may cause malfunctions, which could lead to serious injury,
death, or damage to the product.
The suspension or supporting structure of the chain hoist must be designed for the
maximum load that is caused by the operation of the chain hoist when the chain hoist
is used as intended.

WARNING

FALLING HAZARD
The chain hoist may fall, which could lead to serious injury, death, or damage to the
product.
Do not use chain hoists that have a fixed suspension, such as a suspension hook or
suspension bracket, for inclined pull of loads.
The chain hoist must be suspended with an articulated arrangement. Inclined pull must
be prevented from rigid suspension arrangements.

OWNER’S MANUAL

This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.

6/2020

«
...
39
40
41
42
43
...
»

Содержание STAGEMAKER 100618073

























































































































Отзывы:

Нет отзывов

Похожие инструкции для STAGEMAKER 100618073

Бренд: Yamato Страницы: 17

Бренд: Scheppach Страницы: 56

Бренд: Asist Страницы: 71

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды