manualshive.com logo in svg

Verlinde STAGEMAKER 100618073, Руководство пользователя

Поделиться
Скачать
Verlinde STAGEMAKER 100618073 Скачать руководство пользователя страница 114

2 Chain

Lubricated with oil.

• Lubricate the chain carefully before the first run (commissioning).

◦ Apply a substantial amount of lubricant over the full length of the chain
◦ Make sure that the chain is lubricated all over its surface and links, especially on all contact

areas between the chain links.

• To extend the chain lifetime, continue to lubricate the chain within regular intervals.
• Chain lubrication interval varies from a minimum of one week to one year, depending on the

usage.

Standard lubricant

Installation

Trade name and number

Quantity

Lubricate before first run

Mobilgear 600 XP 220

As required

7 MAINTENANCE

This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.

6/2020

Содержание STAGEMAKER 100618073

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды