Verlinde STAGEMAKER 100618073 Скачать руководство пользователя | Manualshive

Страница: 9 / 120

background image

Symbol

Description

Indicates that the product slows down or moves at its slowest
speed.

Indicates that the product accelerates or moves at its highest
speed.

NOTE

Indicates items which require special attention by the reader.
There is no obvious risk of injury that is associated with notes.

1.1.5

Available technical documents

A set of technical documents is available for this product. The documents serve different
purposes and audiences. Contact your supplier if you require any of the documents that are
listed here.

Mechanical drawings

Describe the mechanical design information of the product

Electrical drawings

Describe the electrical design information of the product

Certificates

Describe that the product is in conformity with the directives
and that it is manufactured according to the standards. The
certificates also display testing results.

Log book

Consists of records of the usage and service history

Spare part manual

Includes part numbers for all supplied spare parts

NOTE

Store the documents in a safe, dry place where they can be easily located when required.

1.2

About this product

1.2.1

Use of the product

The product for general use is an entity which has been designed to perform common lifting and
lowering operations within the limits that are specified by the duty class of the product (see
chapter Hoist duty class). The hoisting machinery for general use may only be modified or used
for any other purpose with the written approval of the manufacturer.

The hoisting machinery for general use is suitable for use in general manufacturing only. It is not
suitable for use in harsh environments. For more information, see chapter Operating conditions.
When in doubt, contact the manufacturer or the representative of the manufacturer.

The product must be positioned directly above (perpendicular to) the load so that there are no
side-pulling forces.

NOTICE

RISK OF PROPERTY DAMAGE
Side pulling accelerates wear on the hoisting machinery.
Never allow the product to be used to pull or drag a load sideways. Always lift the load
clear of the ground before performing any traveling movements.

OWNER’S MANUAL

This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.

6/2020

«
...
7
8
9
10
11
...
»

Содержание STAGEMAKER 100618073

























































































































Отзывы:

Нет отзывов

Похожие инструкции для STAGEMAKER 100618073

Бренд: HSS Hire Страницы: 3

Бренд: Safety Hoist Страницы: 20

Бренд: Chicago Electric Страницы: 10

Бренд: Chicago Electric Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды