Verine Frontier 3 HE Скачать руководство пользователя

Страница: 45 / 61

ABOUT YOUR NEW QUASAR HE / FRONTIER 3 HE / FRONTIER 4 HE

(High Efficiency) Gas Fire

The Verine High Efficiency coal / pebble effect gas fire incorporates a unique and

highly developed fuel bed which gives the realism of a loose coal / pebble layout

combined with realistic flames and glow. The use of durable ceramic material in

the construction of the fuelbed components ensures long and trouble free

operation.

When first using your new fire a slight smell may be noticed. This is due to starch

used in the manufacture of the soft ceramic coals / pebbles, it is non-toxic and will

soon disappear.

Please take the time to fully read these instructions as you will then be able to

obtain the most effective and safe operation of your fire.

IMPORTANT SAFETY INFORMATION

WARNING

This appliance has a naked flame and as with all heating appliances a

fireguard should be used for the protection of children, the elderly and

infirm. Fireguards should conform to B.S. 8423 : 2002 (Fireguards for use

with gas heating appliances).

It is important that this appliance is serviced at least once a year by a registered

gas installer and that during the service the fire is removed from the fire opening

and the chimney or flue visually checked for fallen debris or blockages which must

be removed. The chimney should also be checked to ensure

clearance of flue products. We recommend that during the annual service,

replacement of the Oxypilot is carried out.

This is a condition of the

manufacturers guarantee.

After installation or during servicing a spillage test must always be carried

out.

Rubbish of any type must NEVER be thrown onto the fuel bed, this could affect

safe operation and damage the fire.

Any debris or deposits should be removed from the fuel bed from time to time.

This may be carried out by referring to the cleaning section as described later in

this book. Only the correct number and type of coals or pebbles must be used

and only complete and genuine replacement sets must be used.

Always keep furniture and combustible materials well clear of the fire and never

dry clothing or items either on or near to the fire. Never use aerosols or

flammable cleaning products near to the fire when it is in use.

The ceramic fuel bed remains hot for a considerable period after use and

sufficient time should be allowed for the fire to cool before cleaning etc.

Содержание Frontier 3 HE






























































Результаты поиска

Содержание Frontier 3 HE

Отзывы:

Похожие инструкции для Frontier 3 HE

Бренды по названию

Популярные бренды

Verine Frontier 3 HE, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание Frontier 3 HE

Отзывы:

Похожие инструкции для Frontier 3 HE

Бренды по названию

Популярные бренды