Vents VUTR 200 V2 EC A17, Руководство пользователя

Страница: 14 / 28

www.ventilation-system.com
14
VUTR 200 V(E) EC
UNIT CONTROL PANELS
The unit is controlled via the th-Tune or pGD1 control panels.
Button Functions
Operation mode selection: set the operation mode according to the procedure.
Fan speed selection: set the desired speed level (Low, High or Medium).
While the Automatic Speed Drop mode is enabled the fan speed is set automatically to maintain the supply air
temperature higher than the minimum value.
When the Auto Speed mode is activated the fans operate on the 3rd speed to maintain set air quality
parameters on the humidity sensor and/or outdoor air quality sensor 0-10 V and/or the relay sensor.
The Automatic Speed Drop mode is a priority.
Time range on/off : short pressing.
Activation is confi rmed by a pictogram .
Access to the clock/time range setup menu: press and hold for 3 seconds.
Use the rotary knob to choose the necessary option: setting the current date/time: starts blinking.
Turn the knob to make the desired setting and press to confi rm.
TIMEBAND: setting the time range. Press the knob to set the start time and the corresponding temperature
setpoint for each time range individually (you may create up to six time ranges).
The pictogram shows the current time of a day status (i.e. Day/Nigh) and the presence or absence of
inhabitants in the serviced spaces. Press ESC to exit and return to the standard display mode.
After 10 seconds the th-Tune returns to the main menu automatically.
Unit activation/deactivation; in some menus a short pressing has the same function as ESC.
PUSH
Enter the desired value and press to confi rm.
Press to see temperature and humidity values.
th-Tune
1 3
2
19
18
11 12 13 14 15 16 17
4
6
5
7
8
9
10
Display pictograms:
1. Automatic temperature control mode.
2. Main fi eld.
3. Fan operation mode: Manual/Auto.
4. Fan speed indicator.
5. Temperature measurement unit.
6. Lock function.
7. Setpoint value.
8. Humidity measurement unit.
9. Current time range.
10. Day of the week.
11. Alarm signal.
12. Disabled.
13. CCU operation enable signal.
14. Disabled.
15. Fan operation signal.
16. Operation signal of the electric heating elements.
17. Disabled.
18. Auxiliary fi eld.
19. Unit scheduled operation enabled.
Upon elapsing of the time to fi lter replacement the display shows the alarm symbol and — in the auxiliary
fi eld.