Vents VUTR 200 V2 EC A17, Руководство пользователя

Страница: 8 / 28

www.ventilation-system.com
8
VUTR 200 V(E) EC
UNIT FLOOR MOUNTING
Place the unit on a fl at, stable surface that has suffi cient load capacity
matching the unit weight and meets safety requirements.
Ensure a stable position of the unit by screwing and unscrewing its feet.
HUMIDITY SENSOR MOUNTING (NOT INCLUDED IN THE SCOPE OF DELIVERY)
The humidity sensor is not included in the scope of delivery and can be ordered separately. The humidity sensor must be installed prior to unit
mounting. Remove the service panel and install a humidity sensor into the mount on the extract air duct panel and then connect the humidity sensor
contact socket to the respective contact socket on the control unit.
1
2
3
Contact socket
for connection
to the control unit
Humidity
sensor
Mounting bracket
Contact socket
for connection
to the humidity
sensor
SERVICE SIDE CHANGE
1. Make sure of the correct unit service side selection. Unit mounting position should enable free excess to the service panel for maintenance and
service operations.
Supply air
Supply air
Intake air
Exhaust air
Exhaust air
Additional
extract spigot
Additional
extract spigot
Left-handed modification Right-handed modification
Extract air
Intake air
Extract air