Vents VUTR 200 V2 EC A17, Руководство пользователя

Страница: 6 / 28

www.ventilation-system.com
6
VUTR 200 V(E) EC
DESIGN AND OPERATING PRINCIPLE
The unit has the following operating principle:
Warm stale extract air from the room fl ows to the unit, where it is fi ltered.
Then the air is moved through the rotary heat exchanger and is exhausted outside with the exhaust fan.
Clean cold air from outside is moved to the supply fi lter. Then fi ltered air fl ows through the rotary heat exchanger and the electric heater (for the
VUTR ... V(E) EC units) where it is warmed up to the set value and is moved to the room with the supply fan.
Heat energy of warm extract air is transferred to clean intake fresh air from outside and warms it up in the rotary heat exchanger.
Heat recovery minimizes heat and space losses, heating expenses in cold seasons and cooling expanses in warm seasons.
The unit is equipped with an additional extract spigot for connection of a kitchen hood.
The kitchen hood must be equipped with an air damper to shut off the exhaust duct when the kitchen hood is not in use.
UNIT DESIGN AND OPERATION PRINCIPLE (SERVICE SIDE VIEW)
Intake filter
Extract air filter
Humidity sensor (option)
Supply fan
Supply air
Intake air
Exhaust air
Control unit
Rotary heat exchanger
Rotary heat exchanger drive
Exhaust kitchen hood (option)
Supply filter
with a high filtering class (option)
Extract air
Additional extract
spigot for an optional
remote connection
of a kitchen hood
Electric posistor heater
(unit models with a heater)
The unit is a framework construction made of rigidly fi xed panels.
The panels are made of aluminium and galvanized sheets, internally fi lled with a heat- and sound-insulated layer of mineral wool.
The air handling unit is equipped with quick-detachable service panels for scheduled repair and maintenance operations.
Route power and ground cables through the screwed cable glands to connect those to the terminal block and the grounding bus located in the control
unit.
The wiring diagram is shown on the control unit cover.