BTRM Battery Test Remote Monitoring System – User Guide V3.2 |
ã
2021 Ventev | LIT SKU: 09834
19
The following information should be obtained from your Network Administrator to setup the
SMTP server.
9.3.2
Port
Enter the Port number the SMTP server uses, select SSL if it uses Secure Socket
Layer. Normally this port is 25. For secure server other port numbers are typically used
such as Secure SMTP (SSMTP) - port 465 and Secure IMAP (IMAP4-SSL) - port 585.
9.3.3
User name and Password
If you are using your dedicated IP provider’s internet service and its email server, you
will likely leave these two items blank. If you are on a public network, most likely you will
need to access a secure server using SSL. In this case the username and password will
likely be required.
9.3.4
Server Address
This is the IP address or IP name of your outgoing email server. For example, Gmail’s
server is
smtp.gmail.com
9.3.5
Destination Email Address
The BTRM will send the email notifications to this email address.
9.4
Email Test Page
Use this page to send a test email using the setting from the previous page.
If successful after several seconds, the web page will update to indicate that the message
has been successfully sent. If the page does not refresh after a minute, then likely the
message was not sent. Check you setting, and or try these setting using a laptop and its
email client to verify the connection and settings.
