D. Body prop(s): Federal Regualtion 1926.601, Paragraph10, requires the use of a body prop. Accordingly, all Venco hoist
units will have included as a standard item a body prop (safety strut). See Paragraphs D.1. & D.2. below.
1. The body prop is designed for use only when the truck body is empty. The purpose of the body prop is to provide a
safety strut for use when maintenance or inspections are performed on an unloaded truck body in the raised position.
2. One [1] body prop shall be furnished for truck bodies up to and including 15 feet. For bodies longer than 15 feet in
length, two [2] body props should be used.
3. Venco hoists are equipped with one of three types of body props: Indexing, Swing-down or Linkage.
The chart below shows the hoist model number and the corresponding body prop types available.
NOTE: For an illustration and operating instructions for each body prop type, see page 416645 in this manual.
4. Special Precautions for Swing-down Body Props -
·
Make sure the truck is parked on a flat level surface.
·
Use a suitable tool to pull out the Spring-loaded release pin (stowage device) to release the body prop from the
hoist frame. This will release the body prop allowing it to swing downward to a vertical position.
·
Make sure that the body prop is aligned with the body prop foot rest (the body prop will be in a vertical position),
then allow the truck body to move downward until the body prop is seated in the foot rest.
NOTE: DO NOT POWER DOWN AFTER MAKING CONTACT WITH BODY PROP FOOT REST
·
To disengage the body prop, raise the truck body until the body prop swings freely away from the foot pad. Using
a suitable tool, place the tool in a leverage position on the body prop and propel sharply to the left and upward (or
to the right and upward) so that the locking pin can be compressed and seated in the locking pin hole. Make
certain the body prop is latched securely before the hoist is operated.
BODY PROP OPERATION GUIDE - GENERAL INFORMATION
SECTION
DATE
SUPERSEDES
TITLE
VC416 - VC6628 HOISTS
H150
5-28-14
-
BODY PROP OP. GUIDE
416644
VENCO VENTURO INDUSTRIES LLC
CINCINNATI, OHIO
®
WARNING
!
·
Do not place arms, hands, or any part
of the body between the truck
longitudinals (long beams) or moving
parts to pull the body prop release /
locking pin.
WARNING
!
·
Do not use the body prop(s) to support
a loaded truck body.
·
Body prop(s) should be free swinging to
a vertical position after the locking pin is
released
WARNING
!
·
Read operation of safety strut and caution
labels before operating the hoist.
WARNING
!
·
Use care when reseating the body
prop(s) in the locked position.
Содержание VC 416
