VENCO VC 416, Руководство пользователя

Страница: 14 / 52

SECTION DATE
SUPERSEDES
TITLE
VC416 - VC6628 HOISTS
H150
5-28-14
-
BODY PROP OPERATIONS
416645
VENCO VENTURO INDUSTRIES LLC
CINCINNATI, OHIO
®
FAILURE TO OPERATE SAFELY WILL RESULT IN SERIOUS INJURY OR DEATH!
VEHICLE MUST BE ON LEVEL GROUND.
DO NOT USE BODY PROP TO SUPPORT A LOADED BODY.
DO NOT POWER HOIST DOWN AFTER CONTACT IS MADE WITH BODY PROP.
1. RAISE BODY TO SUFFICIENT HEIGHT TO ALLOW BODY PROP
TO BE EXTENDED AND POSITIONED.
2. LIFT BODY PROP UP UNTIL INDEXING PIN ENGAGES
INDEXING SLOTS AND DROPS INTO THE LOCKED POSITION.
3. LOWER BODY CAREFULLY UNTIL THE BODY PROP
CONTACTS THE UPPER PIVOT TUBE.
1. RAISE BODY TO SUFFICIENT HEIGHT TO DISENGAGE BODY
PROP.
2. LIFT BODY PROP OUT OF INDEXING SLOTS AND LOWER TO
STOWED POSITION.
3. LOWER BODY TO CHASIS RAILS.
TO ENGAGE
TO STOW
BODY PROP OPERATING INSTRUCTIONS
D A N G E R
!
416626-A
FAILURE TO OPERATE SAFELY WILL RESULT IN SERIOUS INJURY OR DEATH!
VEHICLE MUST BE ON LEVEL GROUND.
DO NOT USE BODY PROP TO SUPPORT A LOADED BODY.
DO NOT POWER HOIST DOWN AFTER CONTACT IS MADE WITH BODY PROP.
1. RAISE BODY TO SUFFICIENT HEIGHT TO ALLOW BODY PROP
TO BE EXTENDED AND POSITIONED.
2. TURN BODY PROP HANDLE UNTIL HANDLE MAKES
CONTACT WITH MECHANICAL STOP.
3. LOWER BODY CAREFULLY UNTIL THE BODY PROP
CONTACTS THE UPPER PIVOT TUBE.
1. RAISE BODY TO SUFFICIENT HEIGHT TO DISENGAGE BODY
PROP.
2. TURN BODY PROP HANDLE TO LOWER AND STOW BODY
PROP.
3. LOWER BODY TO CHASIS RAILS.
TO ENGAGE
TO STOW
BODY PROP OPERATING INSTRUCTIONS
D A N G E R
!
416624-A
R
O P E R A T I O N O F S A F E T Y P R O P
DANGER : DO NOT USE SAFETY PROP TO
SUPPORT A LOADED BODY
!
1. Raise body to sufficient height and shut off all power.
2. Unlock PROP(S) and permit to swing freely to the vertical
position.
3. Using inside-the-cab controls, lower body slowly until PROP
contacts lower support bracket.
DANGER :
DO NOT POWER HOIST DOWN AFTER
CONTACT IS MADE WITH PROP
!
To discontinue use of safety PROP:
1. Raise body to sufficient height and shut off all
power.
2. Swing PROP to STORED position and engage
lock.
416084-A
! ! D A N G E R
VC416 / VC516 / VC520 (STANDARD) INDEXING BODY PROP
VC516 / VC520 / VC620 (OPTIONAL) LINKAGE BODY PROP
VC620 - VC6628 (STANDARD) SWING-DOWN BODY PROP
INDEXING PIN
BODY PROP
BODY PROP OPERATION GUIDE - ILLUSTRATIONS & INSTRUCTIONS
TRUCK
FRAME
NOTE: THE LINKAGE BODY PROP OPTION ALLOWS THE OPERATOR TO
POSITION THE BODY PROP FROM OUTSIDE OF THE BODY FOR ADDED
SAFETY. ASK YOUR SALES REPRESENTATIVE FOR MORE INFORMATION.
BODY PROP
BODY PROP HANDLE
NOTE: DUAL BODY PROPS ARE STANDARD ON HOIST MODEL VC6628. REFER TO
THE HOIST BODY PROP CONFIGURATION CHART ON DRAWING 416644 TO
DETERMINE THE AVAILABILITY OF DUAL BODY PROPS FOR OTHER HOIST MODELS.
SWING-DOWN BODY PROP
SPRING RELEASE HANDLE
LOWER SUPPORT BRACKET