1. Thread .750-16 UNF jam nut entire length of threaded hub and onto cable.
2. Place flange on sleeve and turn flange/sleeve assembly entire length of threaded
hub and onto cable.
3. Thread .250-28 UNF jam nut onto threaded rod unitl it bottoms.
4. Thread terminal eye onto threaded rod and bottom against jam nut, turn to align
with spool slot and secure jam nut against terminal eye.
5. Slide terminal eye into slot in spool and align holes. Insert connecting pin and
secure with cotter pin (if applicable).
6. With cable attached to valve and input device, thread the flange/sleeve assembly
onto the threaded hub until it is flush with the valve face. When turning the
flange/sleeve assembly, make sure the input device remains in the neutral
position.
7. Tighten the .750-16 UNF jam nut against the sleeve to lock in position.
8. Bring flange into position and bolt assembly to valve housing using two (2)
socket head cap screws and two (2) split lockwashers under head and two (2) flat
washers under lockwashers. Tighten screws sufficiently to flatten lockwashers or
secure flange. Caution any further torquing/overtightening will distort flange.
Содержание VC 416
