Vela CineCast 2000-0422, Инструкция по установке и эксплуатации

Страница: 35 / 196

Chapter 1 — Getting Started 21
Software Installation
Explorer to select and run setup.exe from the CD-ROM or click Start > Run.
6. Install MDAC 2.6, if it is not already installed on your system. Again you
can download this from the Internet, or you can install it from the installation
CD-ROM. To use the CD-ROM, follow these steps:
• Insert the CD-ROM into the CD-ROM drive.
• When the setup screen appears, select the “Explore This CD” option.
• Double-click on the “System” folder.
• Double-click on the “MDAC 2.6" folder.
• Double-click on the mdac_typ.exe.
• The application will extract files, then ask you to read a license agreement.
After reading the agreement, check the “Accept License Agreement”
checkbox. Click Next.
• If you are asked to restart, allow the system to reboot before continuing.
7. The Autorun setup screen (Figure 1-1) should appear after the system
restart. If it does not, use Windows Explorer to select and run setup.exe from
the CD-ROM or click Start > Run.
8. From the Autorun setup screen, select Install “CineCast,” then follow the
steps listed below:
• Read the Welcome screen (Figure 1-3), then click Next.
• On the “Choose Destination Location” screen (Figure 1-4), accept the C:\
Program Files\ Vela Research
destination, as listed, by clicking Next.
Do not change the destination! The default destination is required
for proper decoder operation.
9. On the “Select Components” screen (Figure 1-5):
• If you have not yet run the MFC update option for this release, check the
“MFC Update” checkbox on the “Select Components” screen. This step
needs to be done only once. If you check this box, there will be an extra set
of steps automatically included in the procedure specified below— and the
installation procedure will require an additional system restart. Just follow
the instructions presented by the MFCupdate.exe installation application.
• Also check the “CineCast Decoder Application” checkbox.
• If you have purchased the SDK, check the “CineCast Decoder SDK” check
box, too. (Because it is password-protected, you will be able to install the
SDK only if you purchased it and received the corresponding password.
If you cannot locate the password, call Vela Support for assistance. You can