5 / 77
System defaults Auto Focus mode, that is, the lens and camera will automatically adjust the focus to get the best image.
Focus can also be controlled manually from the controller if required. Press Focus Near or Focus Far key to manually focus. Focus can be
manual via keyboard or matrix, please refer to control keyboard or matrix operation manual for detailed operation. When adjusting position
is set with auto focus status, it goes back to auto focus.
The camera will NOT auto focus in the following status.
Target is not in the center of image.
Targets are in near and far at the same time.
Target is of strong light object. Such as spotlight etc.
Target is behind the glass with water drop or dust.
Target moves too fast.
Large area target such as wall.
Target is too dark or vague.
3)
IRIS control
System defaults Auto IRIS. Camera can adjust immediately according to the alteration of back ground illumination so that a lightness
steady image can be achieved.
You may adjust IRIS by controller to get required image brightness, and call back Auto IRIS by controlling the joystick.
Auto White Balance
Camera can automatically adjust white balance (WB) according to the alteration of background lightness to give a true color image.
Back Light Compensation (BLC)
If a bright backlight presents, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in
the center of the picture. The camera uses the center of the picture to adjust the IRIS. If there is a bright light source outside this area, it
will wash out to white. The camera will adjust the IRIS so that the object in the sensitive area is properly exposed.
Auto Cruise
The preset position is programmed to be recalled in sequence. This feature is called auto cruise. Up to 30 presets can be saved in each
cruise tour.
Patterns
