42 / 77
< Figure 15. Comm. Adjust menu>
15-1-1. Protocol
•
Selects communication protocol to use.
•
Move the cursor to [PROTOCOL] and press [LEFT] or [RIGHT] button to change the option.
¾
Five protocols are selectable - CNB-ASCII , CNB-HEX , PELCO-D , PELCO-P
15-1-2. Camera ID
•
Configures the Camera’s ID.
•
Move the cursor to [CAMERA ID] and press [LEFT] or [RIGHT] button to change the ID.
¾
Can be selected in between 0 and 255 where 0 is the initial value.
15-1-3. Save/ Reboot
•
The change in the configuration setting will apply after it was saved/ rebooted.
15-1-4. PREVIOUS (same for all sub menus)
¾
Exit without saving
32
15-2. Motion Detection Menu
•
In the Special Menu Screen, Select [MOTION DET] by pressing [menu Set] button to go into the [MOTION DET] menu screen.
