65 / 77
or normally closed (
OFF
).
The circuit will open to generate an alarm if
it is “
NC
” and will close if it is “
NO
”.
ALARM
SETTINGS
This submenu contains the alarm settings.
CLEAR
SETTINGS
This submenu is used to delete the alarm
programming.
DWELL TIME 1
0 ~ 30
Time (in seconds) of activation of the
AUX1 output.
DWELL TIME 2
0 ~ 30
Time (in seconds) of activation of the
AUX2 output.
Table 23
If an alarm is triggered during any automatic operation of the camera (Pattern, Auto Tracking, etc.), the operation in progress is
stopped and the camera executes the action that has been set in the
ALARM ACT
menu:
In the event of Preset action, the camera moves to the preset position. Then, if the option
PARK ACTION
is set to execute an
action, the action will be executed after the
PARK TIME
period has expired.
In the event of "
PATTERN, CRUISE
" actions, the action are executed by the camera permanently and can only be stopped
by one of the following actions: any command sent by a controller or any alarm event.
4.5.5. TRACK
