12 / 77
4.2. HOW TO USE OUR CONTROL KEYBOARD
The camera is ready to receive commands from our control keyboard (see figure below) after connecting.
4.2.1. CONTROL KEYPAD COMMAND SYNTAX
Controls can use the joystick, single keys or key combinations.
The key command syntax is shown below.
Key command syntax
The syntax used in this manual for controls using keys consists of various elements (words and three digit numbers). Each command is
always in braces and each element is separated by commas. Each word or decimal digit used in the syntax is identified by a
corresponding key on our control panel. Words can be enclosed in round brackets, square brackets or no brackets. Three digit decimals
are never enclosed in brackets.
The following words only can be used:
PRESET
,
CALL
,
ESC
,
OPEN
,
CLOSE
,
NEAR
,
FAR
,
ZOOM OUT
,
ZOOM IN
,
CAM
,
MON
,
SCAN
,
ENTER
. The
decimal digits are:
0
,
1
,
2
,
3
,
4
,
5
,
6
,
7
,
8
, and
9
.
Some application examples of controls are shown in detail below.
Using the joystick
A command can also be given simply by moving the joystick because this generates actions on the camera or OSD (On Screen Display)
menu.
