35
6 Set up with the display and adjustment module
VEGAPULS 64 • 4 … 20 mA/HART - two-wire
51141-EN-160815
– Move to the menu overview
– Confirm selected menu
– Edit parameter
– Save value
•
[->]
key:
– Change measured value presentation
– Select list entry
– Select menu items in the quick setup menu
– Select editing position
•
[+]
key:
– Change value of the parameter
•
[ESC]
key:
– Interrupt input
– Jump to next higher menu
The instrument is operated via the four keys of the display and
adjustment module. The individual menu items are shown on the LC
display. You can find the function of the individual keys in the previous
illustration.
When the
[+]
and
[->]
keys are pressed quickly, the edited value,
or the cursor, changes one value or position at a time. If the key is
pressed longer than 1 s, the value or position changes continuously.
When the
[OK]
and
[ESC]
keys are pressed simultaneously for more
than 5 s, the display returns to the main menu. The menu language is
then switched over to "
English
".
Approx. 60 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not confirmed
with
[OK]
will not be saved.
6.3 Measured value indication - Selection
national language
With the
[->]
key you move between three different indication modes.
In the first view, the selected measured value is displayed in large
digits.
In the second view, the selected measured value and a correspond-
ing bar graph presentation are displayed.
In the third view, the selected measured value as well as a second se-
lectable value, e.g. the temperature of the electronics, are displayed.
During the initial setup of an instrument shipped Ex works, use the
"
OK
" key to get to the menu "
National language
".
Adjustment system
Time functions
Measured value indica-
tion