Vega SHLM MI4, Руководство по эксплуатации, Страница: 46 / 72

46 48642-US-150527
2. Notice the initials of the source carriers engraved on the retainer plate.
Figure 6.2
Retainer Plate with Source Carrier Initials
3. Use the large flat head screwdriver to release the door clamps, making note
of the location of the door hinge at the bottom of the actuator cabinet.
4. If space permits, allow the actuator cabinet door to swing open to permit
access to the inside of the cabinet.
5. If a minimum clearance of 30
"
is not available, the installer can remove the
door by pulling the hinge pins out of the hinge on each side of the cabinet.
Figure 6.3
Hinge Pin
6. Reverse this process when reinstalling the door.
These engraved names define the intended position of the source
carriers when they are inserted into the vessel, and will match the
names of the insert cables inside the actuator cabinet.
!
NOTE