About the analyzer
TX50e is an advanced compact handheld analyzer/generator for E1 communications. It can be use for
installation, serve, and maintenance of 2Mbps transmission paths which contain voice, data service at 2.048
Mbps rate.
The test set is connected to the primary data transfer interface (ITU-T Recommendation G.703). It can be operate
as a generator/supervisor for different types of test signal in AMI and HDB-3 coding or as a monitor/signal
analyzer for PCM systems (ITU-T Recommendation 0.162)
Technical specifications
Output Line interface
Input Line interface
Transmitter
Transmitter Clock
Interface
G.703
Connector
RJ-45, banana or BNC
Rate
2.048 Mbit/s
Impedance
120
Ω
balance or 75
Ω
unbalance
Pulse masks
G.703
Line code
AMI, HDB-3
Maximum peak to peak
jitter
0.015 UIpp (Conforms to G.823)
Interface
G.703
Connector
RJ-45, banana or BNC
Rate
2.048 Mbit/s
Impedance
120
Ω
balance or 75
Ω
unbalance
Pulse masks
G.703
Line code
AMI, HDB-3
Maximum input jitter
Conforms to G.823
Clock source
From received signal
Internal: 2.048 Mbps ± 3ppm
External: 2.408 MHz or 2,048 Mbps
Internal clock stability
5 ppm
Frequency offset
± 6 KHz in 1 Hz resolution
Page 4 of 30
TX50e e-Manual D07-00-009 REVA00
