The Byte 1,
Byte 2, and Byte 3 fields allows user to define 24 bits of a user defined pattern.
To edit these fields, move the cursor to the desired bytes and press ‘Enter.’ The digits will be highlighted with
yellow color and use the function key to insert 0 (‘F1’) and 1 (‘F2’). Press ‘Enter’ to finish editing and save the
results. To cancel the edit result, press the ‘ESC.’
Invert RX
This parameter allows the user to invert the received test pattern.
Invert
ТХ
This parameter allows the user to invert the transmitted test pattern.
Voice functions
The menu provides following functions:
1.
Transmit audio data from the microphone into selected timeslot.
2.
Transmit 1000 Hz signal into selected timeslot.
3.
Measure signal frequency and level in selected timeslot.
4.
Listen to the voice channel in selected timeslot via external headset.
5.
Adjust microphone signal amplification.
6.
Adjust headset telephone volume level.
7.
Set up abcd signaling bits in CAS-bits field which is relevant to selected timeslot.
Voice functions measurements
TS Rx/Tx
This field displays numbers of timeslots selected for receiving/transmission signal respectively.
CAS Rx/Tx
The CAS Rx/Tx field shows signaling.
Frequency
This field shows the result of received signal frequency measurement.
Figure 5.5:
“Voice functions measurements” menu
Page 16 of 30
TX50e e-Manual D07-00-009 REVA00
