19
How To Start The Installation Over: Clearing Profiles
1. After setting a local PC to the same subnet as the QuickServer (“Connect The PC To QuickServer Via The
Ethernet Port” on page 12), open a web browser on the PC and enter the IP Address of the QuickServer.
2. If the IP Address of the QuickServer has been changed by previous configuration, the assigned IP Address
must be gathered from the network administrator.
3. The Web Configurator is displayed as the landing page.
4. At the bottom-left of the page, click the “Clear Profiles and Restart” button.
5. Once restart is complete, all past profiles discovered and/or added via Web configurator are deleted. The unit
can now be reinstalled.
BACnet EXPLORER NG
A typical working example of a BACnet Explorer NG on a BACnet Network (see Figure 16).
Figure 16. BACnet Explorer NG On A BACnet Network
•
For additional details related to the BACnet Explorer NG, go to the Sierra Monitor website’s Resource Center
and download the BACnet Explorer NG Start-Up Guide.
•
For purchasing information, look up the BACnet Explorer NG page on the Sierra Monitor website and click on
the “BUY NOW” tab.
Modbus RTU
Up to 32 BACnet
MS/TP devices
Up to 32 BACnet
MS/TP devices
es
BACnet Router
BACnet Explorer NG
BACnet MS/TP
BACnet MS/TP
BACnet MS/TP
Modbus RTU
PC Connected to
BACnet
Explorer’s Web
Browser
Multi-Port Swtich
