11
Interfacing QuickServer To Devices
Power Up QuickServer
Power Up QuickServer
Verify QuickServer nominal power requirements in Table 6.
These values are ‘nominal’ and a safety margin should be added to the power supply of the
host system. A safety margin of 25% is recommended.
After verifying power source and with frame ground connected as shown in Figure 6. apply power to QuickServer.
Table 6. QuickServer Current Draw
QuickServer ProtoNode
Current Draw
12V DC/AC
24V DC/AC
30V DC
Typical
170 mA
100 mA‘
80 mA
Maximum
240 mA
140 mA
100 mA
9
NOTICE
