Using QuickServer Web Configurator To Setup The Gateway
Ethernet Network - Setting IP Address For Field Network
18
Figure 15. Changing IP Address Via FS-GUI
•
Modify the IP Address (N1 IP Address field) of the QuickServer Ethernet port.
•
If necessary, change the Netmask (N1 Netmask field).
•
If necessary, change the IP Gateway (Default Gateway field).
If the QuickServer is connected to a managed switch/router, the IP Gateway of the
QuickServer should be set to the IP Address of that managed switch/router.
•Click the “System Restart” button at the bottom of the page to apply changes and restart the QuickServer.
•Unplug Ethernet cable from PC and connect it to the network switch or router.
•Record the IP Address assigned to the QuickServer for future reference.
The FieldPoP™ button
(see Figure 15) allows users to connect to FieldPoP, Sierra
Monitor’s device cloud solution for the IIoT. FieldPoP enables secure remote connection to
field devices through a FieldServer and its local applications for configuration, management,
maintenance. For more information about FieldPoP, refer to the FieldPoP™ Device Cloud
Start-up Guide.
NOTICE
NOTICE
