manualshive.com logo in svg

VDO MAP 11csE Plus GPS, Руководство пользователя

VDO MAP 11csE Plus GPS - навигационное устройство с расширенными функциями и высокой точностью. Пользовательский руководитель поможет освоить все возможности устройства. Скачайте бесплатно руководство пользователя с нашего сайта manualshive.com, чтобы насладиться всеми преимуществами этого продукта.

Поделиться
Скачать
background image

79

User Manual

Range and Bottom Lock Mode.

[MENU] + "SHIFT" + [ENTER]

NOTE

The bottom Range, Depth, Shift will apply to the currently selected frequency.

7.5.6 Bottom Range

This option is available when Range Mode is Bottom Lock.

[MENU] + "BOTTOM RANGE" + [ENTER]

7.5.7 Frequency

Allows you to choose the frequency between Auto, 50 kHz or 200 kHz when single

frequency page is selected.

[MENU] + "FREQUENCY" + [ENTER]

7.5.8 Interference Rejection

Selects a filter to remove interference from other Fish Finders.

[MENU] + "INTERFER REJECT" + [ENTER]

7.5.9 Sensitivity Menu

The Sensitivity menu is accessible both from the Fish Finder Setup menu and by

pressing 

[ENTER]

 when in Fish Finder pages. All settings in the Sensitivity menu

are related to the Frequency selected.

[MENU] + "SENSITIVITY" + [ENTER]

Frequency

1

:

ONLY 

IN

 

THE

 D

UAL

 F

REQUENCY

 

PAGE

 Allows you to select the Frequency to which the Sensitivity

parameters are applied.

Gain

: Allows you to control the Gain of the unit's receiver. To see more details on the screen, increase

the receiver sensitivity by selecting a higher gain percentage. If there is too much detail or if the
screen is cluttered, lowering the sensitivity may increase the clarity of the display.

STC

: Sensitivity Time Constant: it is a time varying gain curve which attenuates the sonar receiver gain

in shallow water, increasing the gain gradually as  the depth increases. This is for the purpose of
filtering out surface clutter.

STC Length

: If STC is Custom, it is possible to change the Length of the Sensitivity Time Constant.

STC Strenth

: If STC is Custom, it is possible to change the Strength of the Sensitivity Time Constant.

Surf Noise Filter

2

: This function implements an advanced time varying filter that allows suppressing the surface

clutter efficiently while leaving fish targets visible.

NOTE

1

The Frequency value is only displayed: to select the desired frequency see the

previous Par. 7.5.7.

NOTE

2

Thus imposing the capability of the Fish Finder to correctly detect the weakest

echoes coming from a very deep bottom.

7.5.10

Display Setup Menu

The Display Setup Menu allows you to change the color scheme of the Fish Finder

display, adjusts the chart scrolling rate, enables or disables the White Line and

allows determining the graphical representation of fishes.

[MENU] + "DISPLAY SETUP" + [ENTER]

Color Settings

: Allows you to change the color scheme of the Fish Finder display. The available colors are Blue

Background, White Background, Black Background, Gray Scale and Reversed Gray Scale.

Scrolling Speed

: Adjusts the chart scrolling rate. Note that the scrolling rate is limited by the sound speed and the

depth according with the following relation: the deeper the setting, the slower the scrolling rate.
100% is the maximum possible.

White Line

: Controls how the chart plotter displays information about the bottom type (hard or soft).

Fish Symbols

: Allows determining the graphical representation of underwater suspended targets: Echo/Echo+Icon/

Echo+Icon+Depth/Echo+Depth/Icon/Icon+Depth. The Fish icons displayed are among four
different shapes depending on the size of the Target (Small, Med, Big, Huge).

Water Temperature

: Allows you to choose the Water Temperature label displayed over the echogram between Primary

and External.

Содержание MAP 11csE Plus GPS

























































































































Отзывы:

Нет отзывов

Похожие инструкции для MAP 11csE Plus GPS

Бренды по названию

Популярные бренды

Загрузить еще бренды