VDO MAP 11csE Plus GPS Скачать руководство пользователя страница 19

Страница: 19 / 120

User Manual

don’t be able to reselect your language (the above procedure is not of help

to you), follow this procedure: press

[MENU]

two times, move the cursor to

highlight the first item (starting from the top) which corresponds to the

Configurations menu and press

[ENTER]

. Then a window appears with

“Language” message, press

[ENTER];

now select your language and press

[ENTER]

again. Anyway if you in trouble, see Chapter 6 "Maintenance" for

a RAM Clear operation: the chart plotter will also return all selections, in

particular language, to original default values.

2.4

SELECTING THE CHART LANGUAGE

[MENU] + [MENU] + "CONFIGURATIONS" + [ENTER] + "CHART LANGUAGE"

+ [ENTER] + select the language you want + [ENTER]

The possible choices are listed in the table below:

Language

Allows setting the language to display chart information. The language is chosen among the list
of languages available on the cartographic data (C-CARD or embedded charts).

Mode

Defines how objects are translated. It is possible to choose between the three following options:

Off

Uses the same Language used for LANGUAGE. If the selected language is
not present on the objects information, English is used instead;

English Always uses English;
Local

Uses the first Local language present on data. If no Local language is
available, English is used instead.

NOTE

a. When User Interface Language is changed, Chart Language settings are set

as follows: MODE is set to Off and Chart Language is set as the User

Interface Language selection if available on the chart data, otherwise is set

to English.

b. If the cartographic data is changed (for example the C-CARD is removed

or replaced), Chart Language settings should be verified and if necessary

changed.

2.5

USING C-MAP B

EPPESEN

DATA C-CARD

The chart plotter has a built-in world map. To use the chart plotter as a navigation

aid, data C-CARD with detailed information for the area you wish to navigate are

required. See the technical details of your chart plotter for inserting/removing data

C-CARD procedure.

NOTE

During normal operations the data C-CARD should not be removed since the

chart plotter may lock up.

2.6

SIMULATION MODE

The built-in Simulator function allows you to become proficient in the use of the

chart plotter. It simulates the reception of the navigation data (Lat/Lon, Course,

Speed, Date, Time). The simulated ship's position is placed at the current cursor

position by the time the simulation is activated. To start the Simulator:

Place the cursor at your desired po [MENU] + [MENU] + "ADVANCED

SETTINGS" + [ENTER] + "SIMULATION" + [ENTER] + "ACTIVATE SIMULA-

TION" + [ENTER] + "ON" + [ENTER]

You might insert the Speed, Heading, Date and Time values:

[MENU] + [MENU] + "ADVANCED SETTINGS" + [ENTER] + "SIMULATION" +

[ENTER] + "SPEED"/"HEADING"/"DATE"/"TIME" + [ENTER] + enter values

+ [ENTER]

Also in Chart page you might use the cursor up/down to adjust the Speed and the

cursor left/right to adjust the Course. To enable this Cursor Control

function

follow this procedure:

[MENU] + [MENU] + "ADVANCED SETTINGS" + [ENTER] + "SIMULATION"

+ [ENTER] + "CURSOR CONTROL" + [ENTER] + "ON" + [ENTER]

Содержание MAP 11csE Plus GPS

























































































































Результаты поиска

Содержание MAP 11csE Plus GPS

Отзывы:

Бренды по названию

Популярные бренды

VDO MAP 11csE Plus GPS, Руководство пользователя

Результаты поиска

Содержание MAP 11csE Plus GPS

Отзывы:

Бренды по названию

Популярные бренды