manualshive.com logo in svg

VDO MAP 11csE Plus GPS, Руководство пользователя

Поделиться
Скачать
VDO MAP 11csE Plus GPS Скачать руководство пользователя страница 60

61

User Manual

5

. C-LINK

E

5.1

C-LINK

E

C-Link

E

 system is a feature which allows to sharing the same cartographic data

between two Chart Plotter units linked via serial I/O port.

In order to activate C-Link

E

 function, a “MAX data C-CARD” (called REGULAR C-

CARD) must be inserted into one of the two chart plotters and a special MAX data

C-CARD (called MIRROR C-CARD) must be inserted on the other chart plotter.

The two MAX data C-CARDs must have the same code and revision. So, the

MIRROR C-CARD can be utilized only on a chart plotter linked to another chart

plotter provided with the equivalent REGULAR C-CARD.

It is important to point out that the two chart plotters must have the update

software versions that allow C-Link

E

 function.

How C-Link

E

 system works

When the chart plotter is powered up, it switches into the “Stand-Alone Mode”.  In

this work mode, the chart plotter unit periodically scans all the available C-CARD

slots searching for MIRROR C-CARDs. When one or more MIRROR C-CARD is

found (in one or both chart plotters) a special connection is established between

the chart plotters to enable the MIRROR C-CARDs. If a regular C-CARD which has

previously activated a MIRROR C-CARD is removed, even the MIRRORs C-CARD

will be not read anymore on the other unit.

C-Link

E

 serial connection

The two chart plotters should be connected via serial ports. Any of the available

ports can be used, the software will recognize automatically the serial ports used.

A typical connection is as follows:

Chart Plotter 1

Chart Plotter 2

TX

—————>

RX

RX

<—————

TX

GND

<————>

GND

5.2

C-LINK

E

 NAVIGATION DATA TRANSFER

This function allows transferring C-Link

E

 Navigation Data (Route Name, Destina-

tion ID & Position, Next Waypoint ID & Position, Total Route length, Fuel Con-

sumption Rate, ETA, TTG etc.) between two chart plotters linked through the

C-Link

E

 system.

The chart plotters can be set to operate in two modes:

♦

MASTER mode (Primary Chart Plotter)

♦

SLAVE mode (Secondary Chart Plotter)

When the navigation is activated on the Master chart plotter, the C-Link

E

 naviga-

tion data will be continuously sent to the Slave until the navigation is active.

If the Master is navigating to a Single Destination, the Slave will show the Desti-

nation position and activate the navigation to it.

If the Master is navigating to a Route, the Slave will show the Route Leg com-

posed by the Destination and the Waypoint after the Destination (Next Waypoint)

Содержание MAP 11csE Plus GPS

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды