VDO MAP 11csE Plus GPS Скачать руководство пользователя страница 10

Страница: 10 / 120

User Manual

About this User Manual

INTRODUCTION

The chart plotter is a state-of-the-art computerized electronic chart system, de-

signed as a sophisticated navigation aid. User friendly operations make the chart

plotter easy to operate. All calculations and information necessary for navigation

are performed and displayed on the screen quickly and accurately providing all of

the facilities of a conventional GPS but with the added benefit of a powerful elec-

tronic chart display. The cartographic information is obtained from C-MAP B

EPPESEN

C-CARD (cartography data cards) that are available through your local dealer. For

additional information on C-MAP B

EPPESEN

Cartography visit web site at

www.jeppesen.com

CONVENTIONS USED

Throughout this User Manual, the labelled keys are shown in capital letters en-

closed in square brackets, for example

[ENTER]

Menu operations are in bold characters listed by keys sequence with the menu

names enclosed between inverted commas, for example

[MENU] + "OTHER

MAP CONFIGURATIONS" + [ENTER]

means: press the [MENU] key, using the

cursor key select the Other Map Configurations menu and then press [ENTER].

Any menu operation and function activation in this User Manual is related to all

chart plotter models. Whenever it is necessary, a note has been inserted for those

models with differences.

EXPERT FUNCTIONS

It is possible to expand the functions set available on the chart plotter. When the

chart plotter comes from factory or after a RAM Clear (see Chapter 8), only those

menus/items are visible, which are of importance for the basic functions. Due to

this, the chart plotter handling has been considerably simplified for the majority

of users.

Also there are functions which are rarely used, the

Expert Functions

These are

need to be activated before their use

The Expert Functions can be activated selecting the About page (see Par. 4.6) and

then pressing

[MODE]

for 1 second.

The items shown in gray color are the basic functions, they are always active and

visible in the chart plotter menus. The others are the Expert Functions; you could

turn from "Off" to "On" for making visible the desired function in the chart plotter

menus, and then for using in the chart plotter handling.

For example, the Cursor Control function is an Expert Function. To

activate

follow this procedure:

[MENU] + [MENU] + "About..." + [ENTER] + [MODE] for 1 "MENU"

+ [ENTER] + "ADVANCED SETTINGS" + [ENTER] + "SIMULATION" + [ENTER]

+ "CURSOR CONTROL" + [ENTER] + "ON" + [ENTER]

Then, this function is shown in the Simulation Menu, and you could enable or

disable it:

[MENU] + [MENU] + "ADVANCED SETTINGS" + [ENTER] + "SIMULATION"

+ [ENTER] + "CURSOR CONTROL" + [ENTER] + "ON" + [ENTER]

Содержание MAP 11csE Plus GPS

























































































































Результаты поиска

Содержание MAP 11csE Plus GPS

Отзывы:

Бренды по названию

Популярные бренды

VDO MAP 11csE Plus GPS, Руководство пользователя

Результаты поиска

Содержание MAP 11csE Plus GPS

Отзывы:

Бренды по названию

Популярные бренды