VDO MAP 11csE Plus GPS страница 72 Скачать руководство пользователя

Страница: 72 / 120

User Manual

Variable Depth Marker (VDM)

Horizontal line on to the Echogram window with a depth label. The up/down

cursor keys can move it up and down. The label displays the depth of the

cursor position. It can be moved to any location pinpointing the depth of a

target.

Zoom Bar

Bar located on the left side of the Depth Ruler, showing the portion of the

Echogram currently represented in the zoomed window (on the left part of

the screen). It is turned On selecting the Echo Sounder Split page.

A-Scope

A real time representation of fish and bottom features passing through the

beam of the transducer. It is drawn as horizontal lines whose length and hue

is proportional to the sonar strength returned. When the default palette is

selected, the strongest sonar returns will be shown as the color displayed of

the top of Color Bar while the weakest as the bottom color.

Operating Frequency

Readout of the selected operating frequency.

7.2.1 Understanding the Echogram display

The main elements that can be easily distinguished into an Echogram are:

Fig. 7.2.1 - The Fish Finder Echogram

Fishes

Fishes are represented as arcs because of the cone angle of the transducer.

In fact as the boat passes over the fish the leading edge of the cone strikes

the fish, causing a display pixel to be turned on. As the boat passes over the

fish, the distance to the fish decreases turning each pixel on at a shallower

depth on the display. When the boat is directly over the fish, the first half of

the arch is formed and since the fish is closer to the boat, the signal is stronger

and the arch is thicker. As the boat moves away from the fish, the distance

increases and the pixels appear at progressively deeper depths forming the

remaining half of the arch.

Thermoclines

Are the zones where two layers of different water temperatures meet. The

greater the temperature differential, the thicker the thermocline is shown on

the screen. Thermoclines are represented as horizontal stripes of noise. They

are very important for fishing since often many species of game fish like to

suspend in, just above, or just below the thermoclines.

Содержание MAP 11csE Plus GPS

























































































































Результаты поиска

Содержание MAP 11csE Plus GPS

Отзывы:

Похожие инструкции для MAP 11csE Plus GPS

Бренды по названию

Популярные бренды

VDO MAP 11csE Plus GPS, Руководство пользователя

Результаты поиска

Содержание MAP 11csE Plus GPS

Отзывы:

Похожие инструкции для MAP 11csE Plus GPS

Бренды по названию

Популярные бренды