VDO MAP 11csE Plus GPS страница 29 Скачать руководство пользователя

Страница: 29 / 120

User Manual

♦

Production Installation

♦

Pingos

♦

No Data Available

If any of these alarm conditions is detected, the function returns the list of dan-

gerous objects and the relative dangerous Route leg, that is drawn with a differ-

ent color.

To activate this function:

[MENU] + [MENU] + "ROUTE" + [ENTER] + "AUTOMATIC CHECK" + [ENTER]

+ "ON" + 'ENTER'

NOTE

If Automatic Route Check is enabled, anytime you append or insert a new

Waypoint, delete, move or edit any Waypoint, the Route is checked. Only the

modified Route legs are checked.

To select the width of the detected area aside the Route:

[MENU] + [MENU] + "ROUTE" + [ENTER] + "ROUTE WIDTH" + [ENTER]

NOTE

Safe Route width value represents half the total width checked by the

function.

To select the depth of the detected area aside the Route:

[MENU] + [MENU] + "ROUTE" + [ENTER] + "DEPTH LIMIT" + [ENTER]

It also possible to select the accuracy for the Route check, among Minimum, Low,

Medium, High and Maximum:

[MENU] + [MENU] + "ROUTE" + [ENTER] + "ACCURACY" + [ENTER]

The list of the dangerous objects found on the charts crossed by the Route is

shown in the Route check report, follow the procedure:

[MENU] + [MENU] + "ROUTE" + [ENTER] + "ROUTE CHECK REPORT" +

[ENTER]

3.3

GOTO FUNCTION

This functions allows you to place the destination point and immediately start

navigating to it.

Navigation to Waypoint

Place the cursor on the desired Wa [ENTER] + "GOTO" + [ENTER]

A circle surrounds the Waypoint symbol. A dotted line is shown, connecting the

destination with the ship's position. When the destination is placed, all navigation

data are referred to it.

Deleting destination

If the destination has been placed, to stop the navigation to the Waypoint:

Place the cursor on destination icon + [ENTER] + "STOP NAV" + [ENTER]

NOTE

If you select "NEXT"/"PREVIOUS" the destination icon is moved on the next/

previous Waypoint in the Route.

Otherwise when the cursor is placed on a generic position on the chart:

[ENTER] + "GOTO" + [ENTER] + "STOP NAV" + [ENTER]

NOTE

If you select "START", the destination icon is moved on the new cursor position.

The symbol that identifies the destination disappears from the screen, but the

Waypoint remains.

Содержание MAP 11csE Plus GPS

























































































































Результаты поиска

Содержание MAP 11csE Plus GPS

Отзывы:

Похожие инструкции для MAP 11csE Plus GPS

Бренды по названию

Популярные бренды

VDO MAP 11csE Plus GPS, Руководство пользователя

Результаты поиска

Содержание MAP 11csE Plus GPS

Отзывы:

Похожие инструкции для MAP 11csE Plus GPS

Бренды по названию

Популярные бренды