PROBA 5
Doc.nr: 170366
Version: 1.1
Page
18
of
32
2.2 Subtab Programs
Use this tab to define program templates that are selected in Ripe-mode (see Ҥ2.1.2.2 Operation
mode - Ripe” on page 10).
Fig. 26
Programs configuration
Select available program
template
Select point at graph and
drag blue point to another
location or delete (use
right mouse button).
Select the
cells that
can use this
program
Add
Show the
parameters
as a point in
the line of the
corresponding
series.
Change Change
corresponding
point of selected
series in graph.
Delete Delete
corresponding
point of selected
series in graph.
Parameters
Parameters that
are shown here
depends on the
selected series.
See next pages.
Set
Set the
parameters that
are used during
‘Standby’-mode.
Select here the signal from witch a point in the graph is
added, changed or deleted.
Only the selected signals in ‘Active series’ are listed here.
Day 0 settings
Day 0 is the time
before the ripening
program will start.
Day 0 is used to
equalize the product
temperature before
the program start or
to store the unripe
product.
