Page
19
of
32
PROBA 5
Doc.nr: 170366
Version: 1.1
2.2.1 Selected series - Temperature
Selected series - Temperature
2.2.2 Selected series - Gas Concentration
Fig. 27
Selected series - Gas Concentration
2.2.3 Selected series - Gas Time
Fig. 28
Selected series - Gas Time
Date and time in
graph for temperature
setpoint
Date and time for temperature
setpoint that is used during
‘Standby mode.
Yes: Line between two setpoints is scaled.
Therefore, setpoint will gradually change.
No: Line between two setpoints is not scaled.
Therefore setpoint change will result in a
jump.
Set: Store ‘Standby’ mode parameters.
Setpoint temperature
in graph
Setpoint temperature
that is used during
‘Standby mode
No
Yes
Gas
selection
It is not possible to select both
‘Gas Concentration’ and ‘Gas
Time’ in the same program.
End date and time of gassing
period.
Set: Store parameters.
Setpoint gas concentration in graph
Date and time in graph
for gassing setpoint
Yes: Line between two setpoints is scaled.
Therefore, setpoint will gradually change.
No: Line between two setpoints is not scaled.
Therefore setpoint change will result in a
jump.
No
Yes
Date and time in graph
for gas time setpoint
End date and time in graph
that is started with gassing.
Set: Store parameters.
Setpoint gassing period
