Page
11
of
32
PROBA 5
Doc.nr: 170366
Version: 1.1
Setpoint fan speed
2.1.2.3 Operation mode - Standby
Select ‘Standby’ to start with one gassing cycle and then maintain a constant ventilation regime with
fixed relative humidity and temperature setting. However, it is possible to (de-)activate ventilator,
heating and gassing manually.
Fig. 10
Standby parameters
2.1.2.4 Operation mode - Stop
Select ‘Stop’ to interrupt current mode. After stopping it is possible to change to other mode.
Fig. 11
Stop mode
2.1.2.5 Manual ventilation
A manual ventilation can be set. This ventilation will on be executed once. This can be used if you want
to be sure that it’s safe to enter the room.
Depending on the parameter settings, a gassing period can be stopped if a manual ventilation has
been executed.
If there is gas in the room, gas should be set to off and the manual ventilation should be confirmed
before it will take place. This to avoid that the gas leaves to room unwanted.
Fig. 12
Switch gas off
Ventilation cycle time
Gassing cycle time
Setpoint relative
humidity
Setpoint temperature
Setpoint fan speed
Ventilation activation
time
Gassing activation time
Interrupt standby mode
Start standby mode
Do not change mode
Interrupt current mode
