PROBA 5
Doc.nr: 170366
Version: 1.1
Page
6
of
32
1 Tab Overview
Depending on the license, you should first select a location and then the required overview is shown. If
the location option is not in your license, the overview tab will directly show.
In the tab ‘Overview’ all configured controllers are shown. There are maximal 100 controllers available
on one location. These controllers are divided on four pages.
Select a cell to show the concerning details in a new tab. In this way multiple cells can be selected
what will lead to multiple tabs (see next chapter).
Fig. 1
Overview location
Tab list
Use tab ‘List’ to get an
overall view of all cells with
corresponding general
measurements.
Visibility of
current phase
Current phase is only presented
if it is active.
Back ground colour is also used for status:
Ripening
Gassing
ULO
Failure
Greyed out
= not active
No
communication
Humidity
Selection of a
group cells
Gas concentration
Pressure
Pressure reverse
Status Name of batch
Current average of controlled
temperature
Average setpoint control
temperature
Current status of cell section:
heating
cooling
off
Current phase of cell:
ventilation phase
gassing phase
humidifying phase
Door
closed
Door
open
