Vatech Pax-i PCH-2500, Руководство по установке

Страница: 57 / 200

PaX-i
(PCH-2500) Installation Manual
57
4 Installing the Equipment: Floor Standing (Optional)
Combining the equipment with the anchor bolts
Combining the Equipment with the Hex Bolts
1. Place the equipment properly in its position and fix the wall
bracket to the wall with four Hex Bolt

Bolt tightening guide(Tmax): 8Nm
Hex Bolt M8XL15
Spring washer M8 spring washer
Flat washer M8 flat washer
Torque wrench
Torque wrench
(Spanner type)
Combining the Equipment with the Hex Bolts
1. Place the equipment properly in its position and fix the wall
bracket to the wall with four Hex Bolt

Bolt tightening guide(Tmax): 8Nm
Hex Bolt M8XL15
Spring washer M8 spring washer
Flat washer M8 flat washer
Torque wrench
Torque wrench
(Spanner type)
On the wall
1. Place the equipment on the alignment plate,
while observing 4 Hex bolts are being
inserted properly through each hole.
Installers required 3
Hex Bolt M8 x 15
Combining the Equipment with the Hex Bolts
1. Place the equipment properly in its position and fix the wall
bracket to the wall with four Hex Bolt

Bolt tightening guide(Tmax): 8Nm
Hex Bolt M8XL15
Spring washer M8 spring washer
Flat washer M8 flat washer
Torque wrench
Torque wrench
(Spanner type)
Spring
washer
M8
Combining the Equipment with the Hex Bolts
1. Place the equipment properly in its position and fix the wall
bracket to the wall with four Hex Bolt

Bolt tightening guide(Tmax): 8Nm
Hex Bolt M8XL15
Spring washer M8 spring washer
Flat washer M8 flat washer
Torque wrench
Torque wrench
(Spanner type)
Flat washer M8
Combining the Equipment with the Hex Bolts
1. Place the equipment properly in its position and fix the wall
bracket to the wall with four Hex Bolt

Bolt tightening guide(Tmax): 8Nm
Hex Bolt M8XL15
Spring washer M8 spring washer
Flat washer M8 flat washer
Torque wrench
Torque wrench
(Spanner type)
Torque
wrench
Spanner
type
Combining the Equipment with the Hex Bolts
1. Place the equipment properly in its position and fix the wall
bracket to the wall with four Hex Bolt

Bolt tightening guide(Tmax): 8Nm
Hex Bolt M8XL15
Spring washer M8 spring washer
Flat washer M8 flat washer
Torque wrench
Torque wrench
(Spanner type)
2. Remove the handle in the middle.
If the CEPH unit is to be installed, this is
used as the carrying handle. Do not detach
it until indicated later after the equipment is
moved to the installation site