INSTALLATION
Series 613
44/149
Edition 12.08.2022
984360EC
5.12.4.5
Error Codes
Code
Error text
Description
00
no error
no error
0C
wrong command length
wrong command length
1C
value too low
value out of range: lower then min limit
1D
value too high
value out of range: higher then max limit
20
resulting zero adjust offset value out of
range
resulting zero adjust offset value out of range
21
not valid because no sensor enabled
not valid because no sensor enabled
50
wrong access mode
wrong access mode
51
time out
6D
EEProm not ready
6E
wrong parameter ID
wrong parameter ID
6F
set to default value not possible
set to default value not allowed
70
parameter not settable
set value not allowed
71
parameter not readable
get value not allowed
72
set to initial value not possible
initial value not allowed
73
wrong parameter index
wrong parameter ID index (array)
74
initial value out of range
wrong initial value
76
wrong value
wrong value within range
77
wrong value, only reset possible
only value reset possible
78
not allowed in this state
not allowed in this state
7A
wrong service
service (action) not valid
7B
parameter not active
parameter is inactive
7C
parameter system error
parameter system error
7D
communication error
communication error (e.g. buffer overrun)
7E
unknown service
7F
unexpected character
80
no access rights
81
no adequately hardware
82
wrong object state
84
no slave command
85
command to unknown slave
87
command to master only
88
only G command allowed
89
not supported
A0
function is disabled
A1
already done
