Varta Pulse neo 3, Руководство по эксплуатации

Страница: 98 / 148

Servicing
98
11.3.1. Air filter replacement: Time reset
The air filter must be replaced on every
other servicing. Refer to chapter 11.4.7.
„ Select
â Settings â Service.
„ Press the button.
11.3.2. Checking current sensor values
„ Check the sensor values (I phase L1,
I phase L2 and I phage L3) for
realistic values.
Measures in case of value 0:
If one sensor value is approx. 0 although
the phase is currently under load, the
connection between current sensor and
energy storage system may be disturbed.
„ As necessary, load all phases
separately: Switch on targeted
consumers.
„
As necessary, check the current flow
through all three phases with a clip-on
ampere meter.
Measures in case of irregular current
sensor values:
„ Make sure that the connection has a
clockwise phase sequence.
If the current sensor value of one of more
phases is 0 despite loading, check the
connection between the energy storage
system and the current sensor.
As necessary, replace the
connection line (RJ12 cable).