Varta Pulse neo 3, Руководство по эксплуатации

Страница: 59 / 148

Installation
59
„ The length of the PE conductor must
exceed the length of the other
conductors by 8 mm. Shorten the
conductors respectively.
„ Strip the insulation of the wires of the
line at the ends by 9 mm.
„ Connection of a single-wire
conductor: Fully insert the stripped
conductor.
„ Connection of a fine-wire conductor:
Press the clamp spring with a
screwdriver (2.5 mm). Fully insert the
stripped conductor.
„ To release the line, press the spring
with a screwdriver.
„ Bring the connection cable into shape
„ Engage the tension relief fitting at the
connection piece and insert the cable.
„ Engage the top of the tension relief
and tighten it with the screw.
AC connector
Tension relief