KÄYTTÖOHJEET
40
87-900-855-01 (B)
VIESTI
VIKA
KORJAUSTOIMENPITEET
CHECK CONNECTION
TO PUMP
Toimintahäiriö pumpun ja valvojan
liitännässä (P31).
Tarkistakaa että pumpun ja valvojan
välinen yhteyskaapeli on hyvin kiinnitetty
päistään eikä sen varrella ole esteitä.
Painakaa kaksi kertaa painonappia
START jolloin pumppu käynnistyy.
PUMP WAITlNG INTERLOCK
Lukitussignaali (interlock) liittimessä P1
on aktiivinen johtuen liittimen J1
neulojen 3 ja 8 välillä tapahtuneen
oikosulun keskeytyksestä tai ulkoisen
lukitussignaalin (interlock)
avautumisesta.
Palauttakaa liittimen J1 neulojen 3 ja 8
välinen oikosulku tai sulkekaa
ulkopuolinen lukitussignaali (interlock).
FAULT: OVERTIME
Pumppu ei ole saavuttanut asetettua
nopeutta 5500 KIER/MIN 12 minuutin
kuluessa käynnistyksen jälkeen silloin,
kun SOFT START ei ole käytössä.
Tarkista ettei järjestelmä vuoda. Paina
painiketta START kaksi kertaa, jolloin
pumppu käynnistyy uudelleen.
FAULT: PUMP
OVERHEATED
Lämpötila on ylittänyt yhden
kynnysarvoista:
- 65 °C laakereille
- 90°C moottorille
- 60 °C vedelle.
Odottakaa että lämpötila putoaa
kynnysarvon alapuolelle.
Painakaa painonappia START kaksi
kertaa jolloin pumppu käynnistyy.
FAULT: CONTROLLER
OVERHEATED
Valvojan muuntajan lämpötila on
ylittänyt 90°C tai ulostulon Mosfets-
piirikorttien jäähdyttimen lämpötila on yli
60°C.
Odottakaa, että lämpötila putoaa
kynnysarvon alapuolelle.
Painakaa painonappia START kaksi
kertaa jolloin pumppu käynnistyy.
FAULT: OVERLOAD
Normaalityöskentelyn aikana
(käynnistyksen jälkeen) pumpun
absorboima sähkövirta on korkeampi
kuin sille on ohjelmoitu (25 A).
Tarkistakaa, että pumpun roottori pyörii
vapaasti. Painakaa painonappia START
kaksi kertaa jolloin pumppu käynnistyy.
FAULT: SHORT CIRCUIT
Normaalityöskentelyn aikana poistoliitin
on oikosulussa (poistuva virta suurempi
kuin 60 A).
Tarkistakaa pumpun ja valvojan välinen
liitos.
Painakaa painonappia START kaksi
kertaa jolloin pumppu käynnistyy.
Tarkista moottorin ja pumpun välinen
eristys.
SYSTEM OVERRIDE
Kaukokytkimestä tuleva hälytyssignaali
on pysäyttänyt pumpun.
Irroittakaa valvojan sähkökaapeli
verkkovirrasta ja korjatkaa hälytyksen
aiheuttaja.
Kytkekää sähkökaapeli uudelleen ja
painakaa painonappia START kaksi
kertaa jolloin pumppu käynnistyy.
OVERVOLTAGE
Valvojan sähkövirran syötössä on
ilmennyt ongelma tai valvojan saama
signaali on väärä.
Painakaa painonappia START kaksi
kertaa, jolloin pumppu käynnistyy.
Mikäli viesti näkyy uudelleen kääntykää
Varian huoltopalvelun puoleen.
OIL LEVEL AT MIN
Öljyn tason anturi on havainnut tason
olevan turvarajaa alhaisempi.
Suorita pumpun huolto ohjekirjan
ohjeiden mukaisesti.
Содержание Turbo-V 6000
Страница 2: ...Turbo V 6000 Controller...
Страница 3: ......
Страница 4: ......
Страница 80: ...TECHNICAL INFORMATION 74 87 900 855 01 B...