![background image](http://html1.mh-extra.com/html/varian/969-8988/969-8988_instruction-manual_854644038.webp)
TECHNICAL INFORMATION
96 87-900-986-01 (
C
)
HOW TO USE BY REMOTE I/O
1. Power ON the controller
2. Press the “COUNTERS” and “MEASURES” button
toghether.
3. Select MODE = REMOTE from the
“INPUT/OUTPUT” menu
4. Exit from configuration menu
5. Connection
example:
HOW TO USE IN SERIAL MODE
1. Power on the controller
2. Connect the serial cable
3. Select by front panel if you want to work in 232 or
485, and if necessary, the serial address.
4. Select SERIAL from the INPUT/OUTPUT menu
5. Open the T+ software (see orderable parts table)
6. Ready to operate by SERIAL connections.
1
2
3
4
5
6
7
8
9
15
8
13
6
12
5
14, 11
7, 4
2
1
9
Open = Stop
Cloed = Start
Imput
Connector
Output
Connector
Controller
Start/Stop
Low Speed
Interlock
Soft Start
System Override
Open = High Speed
Cloed = Low Speed
Closed
Open
= Stop
= Allow Start
Open = Normal Start
Cloed = Soft Start
OFF = OK
ON = Fail
OFF = Pump under speed threshold
ON = Pump over speed threshold
OFF = Stop, Normal Operation
ON = Ramp
OFF = High speed
ON = Low speed setted
Power value
Speed value
Monitor (Com)
Pump Power
Monitor (10V=150W)
R2, R1
R2, R1
(+ 24 VDC)
Low Speed
Start
Start (+24 VDC)
Fault (+24 VDC)
Fault
Low Speed (+24 VDC)
Pump Frequency
Monitor (10V=81 KRPM)
v
v
4 K7
4 K7
4 K7
4 K7