
U
SER
M
ANUAL
www.vareximaging.com
43
Index
Numerics
2315NDT Detectors Voltage Requirements
A
Abbreviations
Appendix A – Technical Drawings
Audience
C
Calibration
Dark current
Flood field
fully corrected image
Calibration and Image Quality Guidelines
Comparison
v1 & v2 Detectors
Configuration menu
High Full Well
Low Full Well
Readout mode Continuous
Readout mode Idle
Continuous readout - Expose and read
Continuous readout - External Duration Trigger
Continuous readout - External Edge Trigger
Continuous readout - Frame-rate exposure
Continuous readout - Pre-programmed Exposure
Continuous readout - Sequence exposure
Continuous readout - Software Trigger
Cooling
D
Data Interface
Definition of Symbols
Description of the X-ray Detector
Detector Design
Detector Functions
development kit
Optional
Provided Upon Request
Disclaimer
discrepancies
between v1 & v2 sensors
Binning mode
Offset image
Readout column
Readout time
Sensitivity HFW
Sensitivity LFW
Sensor readout
Temperature sensor
Trigger sources
Disposing of the X-ray Detector
E
Embedded Features
External Connection
External DC power supply requirements
External Edge Trigger
G
Getting Started
I
Idle readout – Expose and read
Idle readout - External Edge Trigger
Idle readout – Software Trigger
Image Quality Guidelines
Installing and Connecting the Detector
Dark current
Defect corrections
Flood field
Installing the detector
Signal Levels
Interferences with Other Devices
L
Limitations of Use
M
Modes of Operation
Mounting
O
Other sources of Information
P
PC requirements.
Permanent Mounting
Power Supply
Powering Up the Detector and Acquiring Raw
Images
Powering-down the Detector
Producing a Correct X-ray Image
Protective Earthing
R
Readout mode ‘Continuous’
Readout mode ‘Idle’
References
S
SCap
Dark Correction
Defect Correction