USER
M
ANUAL
www.vareximaging.com
15
2315NDT v2 CMOS X-ray Detector User Manual
In addition, a PC is required to control the detector and receive images.
lists the minimum
PC requirements.
14.1
Installing and Connecting the Detector
Use the following steps to install and connect a Varex Imaging CMOS flat panel X-ray detector
and to capture a first raw X-ray image.
PT-001567
Camera Link Data Cable, 90° angled connector (down), 5 m
PT-001379
Camera Link Data Cable, 90° angled connector (down), 3 m
PT-001415
Camera Link Data Cable, 90° angled connector (up), 1.5 m
PT-001537
Camera Link Data Cable, 90° angled connector (up), 1.3 m
PT-001442
Camera Link Interface Card, EPIX E8
Table 8
PC Requirement
Computer requirement
Processor:
Intel i5
Memory:
2 GB
Disk space:
10 GB
Spare slot:
PCIe ×4
Operating system:
Windows 7 (32 Bit / 64 Bit)
WARNING
The detector and associated components should only be installed and
used by persons with appropriate training and experience and in
accordance with the instructions provided in this manual.
WARNING
Varex Imaging CMOS flat panel X-ray detectors contain fragile optical
and electronic parts. Excessive shock and vibration during handling
and installation may cause damage to the unit.
Table 7
Optional Accessories (Continued)
Article No.
Description