Vanner IQ12-2600, Руководство пользователя

Страница: 8 / 44

VANNER POWER GROUP VANNER POWER GROUP IQ SERIES IQ SERIES
- 8 - IQ SERIES OWNERS MANUAL
1.4 Accessories
Part Number Name Description
D07869 Remote Operating Panel Remote ON/OFF Switch and Indicator Light
Display Panel with 25ft modular cord.
D07905 Universal Remote Adapter Screw terminal phone jack adapter and 2ft
modular cord. Allows use of customer supplied
SPDT center OFF momentary switch.
D07917 Remote ON/OFF Switch SPDT center OFF momentary toggle switch, 25ft
cord and includes D07905.
D07934 APM Panel Auxiliary Power Management Panel with 25ft
modular cord.
D07924 30 Amp AC Output Cord 30 amp Twist Lock receptacle mounted to 1ft
long 10/3 cable with forked connectors.
D07923-03 Quick Connect DC Input for 3/0 For use with customer supplied 3/0 DC input
cable. Includes 18" long 4/0 DC Input Cable with
polarized 350 amp Quick Connector, and mating
connector for 3/0 cable.
D07923-04 Quick Connect DC Input for 4/0 For use with customer supplied 4/0 DC input
cable. Includes 18" long 4/0 DC Input Cable with
polarized 350 amp Quick Connector, and mating
connector for 4/0 cable.
1.5 Definitions
1.5.1 Quasi Sine Wave:
Quasi Sine Wave Inverters are sometimes called "modified sine wave inverters" or "modified
square wave inverters." Quasi sine wave inverters produce an AC output wave different from the
power produced by the electric utility companies and rotating generators. Although this wave form
has a higher peak voltage than do square wave inverters, its peak voltage is not as high as a
pure sine wave. Therefore, AC loads containing power supplies might not always operate
properly on the quasi sine wave inverters.
1.5.2 Load Demand Feature and Load Demand Mode :
The Load Demand Feature is an energy conserving feature which allows the inverter to enter the
‘Load Demand Mode’ whenever the inverter is ON and the AC load has been less than 5 watts for
approximately 5 seconds. While in the ‘Load Demand Mode’ the inverter does not produce 120
volts AC but instead produces pulses of reduced AC voltage which the inverter uses to look for a
load. When an AC load greater than 5 watts is sensed, the inverter will turn fully ON to produce
120 Volts AC. The ‘Load Demand Mode’ is often also described as ‘stand-by mode’ or ‘sleep
mode’. While in the ‘Load Demand Mode’ the inverter consumes approximately 140 milliamps of
12 volt DC power.