Vanner IQ12-2600, Руководство пользователя

Страница: 10 / 44

VANNER POWER GROUP VANNER POWER GROUP IQ SERIES IQ SERIES
- 10 - IQ SERIES OWNERS MANUAL
WARNING Risk of electrical shock. Use only the ground fault circuit interrupter (GFCI) receptacle(s)
or circuit breaker(s) specified in the installation and operating instructions supplied with
this inverter. Other types may fail to operate properly when connected to this equipment.
CAUTION Read owners manual BEFORE wiring or powering up.
CAUTION DO NOT cover or obstruct ventilation openings. DO NOT mount in zero-clearance
compartments. Overheating may result.
NOTICE The output of this device in not sinusoidal. The IQ SERIES inverter has a total harmonic
distortion of 34.6 percent and maximum single harmonic of 24 percent.
1.7 General Precautions
1. Do not expose the Vanner IQ series Inverter to direct water spray or snow.
2. To reduce the risk of a fire hazard, do not cover or obstruct the ventilation openings.
3. Do not install this unit in a zero clearance compartment the result may be overheating or diminished
performance.
4. To avoid the risk of fire, electric shock, or injury to persons, do not use attachments not
recommended or sold by the Vanner Power Group
5. Vanner recommends that all DC and AC electrical wiring be performed by a certified electrician or
technician to ensure compliance with all proper national and local wiring regulations.
6. To avoid a risk of fire and/or electric shock, always verify wiring connections are in good electrical
condition. All external conductors must use proper wire size to avoid dangerous overheating or
diminished performance.
7. If the Vanner inverter system has been dropped or damaged in any way, do not operate until its
operation has been verified to be safe by a qualified technician.
8. To reduce the risk of electric shock always disconnect the AC and DC connections to the Vanner
Inverter system before attempting any maintenance. Simply turning the unit off does not prevent
electric shock.
9. The Vanner “IQ Series” inverter system must be properly grounded in accordance with local and
national codes and ordinances before operation. For most installations the negative (ground)
conductor should be bonded to the grounding system at one and only one point in the system.
10. Do not disassemble the IQ Series Inverter/Charger; see the service section of this manual for
instructions on obtaining service for the IQ Series Inverter/Charger. Attempting to service the unit
yourself may result in a risk of electrical shock or fire
1.8 Explosive Gas Precautions
1. This equipment contains components, which tend to produce arcs or sparks. To prevent fire or
explosion do not install in compartments containing batteries or flammable materials or in locations,
which require ignition, protected equipment. This includes any space containing gasoline-powered
machinery, fuel tanks, or joints, fittings, or other connection between components of the fuel system.
2. Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during
normal battery operation. To reduce the risk of battery explosion, follow these instructions and those
published by the battery manufacturer and the manufacturer of the equipment in which the battery is
installed.